In Darwin’s hot, humid climate, “air conditioning” means getting rid of moisture and heat to make the air in a building more comfortable. Choosing the right system for your building requires a bit of thought, so let’s look at some of the considerations and the best way to deal with them.
Since we have already mentioned it, let’s look at that humidity: how much of an issue is it for you? If it is crucial that you moderate it, you will need air conditioning with a “dry” mode, which can reduce the moisture content of the air without drastically lowering the temperature. This is done by running the fan and compressor at relatively low speeds so the moisture can be condensed.
The most common type of air conditioner is commonly known as a split air conditioner. This has a unit on the outside of the wall containing a compressor, which deals with the heat, and a fan unit inside, which distributes the cooler air around the room. It enables the user to condition one room individually, and of course, if you want to deal with two or more rooms, you can have separate units for each. Commercial or industrial premises may have one large unit with a ducting system that does the job for an entire floor.
Choosing the Right Air Con Size for Maximum Efficiency in the Heat
Different units are designed for different conditions, so keep in mind Darwin’s climate, which is quite uncompromising, and discuss what you need with the contractor. They will have seen many examples and can give useful recommendations. Make sure what you are buying is up to the job, but also don’t go for a larger unit than you need, as this will generate unnecessary noise and high electricity bills.
Key Considerations for Outdoor Unit Placement and Shading
As we saw with regard to split units, there are compressors on the outside wall, and these can be an eyesore. A building with several of these littering the space can look unsightly, and that is one reason for thinking carefully about placement.
Other reasons are to do with optimising performance. An external unit exposed to full sunlight can become overheated – and bear in mind there is a lot of heat involved in the system anyway, as it strives to keep the degrees out of the building. Placing the unit on a north or east-facing wall can help considerably.
There is also the issue of noise, so you don’t want to place units next to someone trying to focus on their work.
What to Expect During the Professional Installation Process
There will be a degree of disruption during installation because there are holes to be drilled and brackets to be fitted. The power will have to be turned off at times, and there will be noise and dust. As with any building work, though, much depends on the people doing the work, and a considerate tradesperson will keep the mayhem to a minimum.
Post-Installation Checklist and Warranty
Once the installation is complete, the unit may take a few hours to reach optimum performance, so give it a chance to settle down. As it begins working, check the warranty to ensure you know what you need to do to maintain your air conditioner and have it working for years to come.
Also, look out for drips of condensed air, any burning smells and observe the general standard of the work. Is everything level and stable? At Florance Electrical, we’ll do the job right the first time to save you any hassle. Get in touch with the team.